One hazard produced two separate recall checks
On August 13, the U.S. Consumer Product Safety Commission published separate recalls for COMMOWNER and SUGIFT electric pressure washers. In both notices, CPSC says the machines lack an integral ground-fault circuit-interrupter and have a short power cord that may encourage extension-cord use, posing serious risks of shock and electrocution.
Neither notice reports an incident or injury. That is not clearance to keep a recalled machine in service: each directs consumers to stop using the covered pressure washer immediately and contact the responsible company for a full refund.
The scope is model-specific. The notices do not recall every electric pressure washer, every product sold under either brand, or every machine used with an extension cord. Match the identifiers and purchase history before classifying a unit, and ask the recall contact when the evidence is incomplete.
COMMOWNER: the rear label and listing name may differ
Recall 26-692 covers 1,694 COMMOWNER electric pressure washers identified as HD14P-Z and HX18. CPSC says HD14P-Z is printed on a label on the back, while the machine may have been listed for sale as HX18. The covered three-gallon-per-minute units are orange, green, or blue with black parts and were supplied with a 500-milliliter tank, foam cannon, four quick-connect nozzles, and a 33-foot hose.
The recalled units were sold on Amazon in April 2026 for about $150. Search the Amazon account, purchasing card, emailed receipt, asset register, and any employee-reimbursement record as well as the rear label. Color, accessories, or a marketplace title alone are not enough to clear a machine.
SUGIFT: the model number may not be on the machine
Recall 26-699 covers 13 SUGIFT electric pressure washers, model LTBBHG006. CPSC says that model number does not appear on the product; it was included in the Best Buy website listing. The covered 2.8-gallon-per-minute machine is orange and black, has a touch screen, reads “High Pressure Washer” on the front, and came with a foam cannon, four quick-disconnect nozzles, a 20-foot hose, and two rollers.
The units were sold on BestBuy.com from July 2025 through July 2026 for about $155. Because the decisive model identifier may live only in the order record, a shop walk-through is incomplete without checking online purchase histories, invoices, and archived product links.
Follow the refund sequence; do not invent a repair
CPSC directs owners of either recalled model to stop use immediately and contact the company named in the relevant notice for a full refund. The notices say consumers will be asked to destroy the machine by cutting the power cord only after it is completely turned off and unplugged, send a photograph of the destroyed unit, and then dispose of it. Contact the recall firm first so the current instructions and refund evidence are clear before disabling or discarding the machine.
Neither notice offers a repair. An upstream protected receptacle, portable GFCI, different extension cord, replacement plug, or in-house electrical change is not the remedy CPSC published and should not be used to return the recalled unit to work. Keep the machine isolated until the recall process is complete.
CPSC also states that federal law prohibits selling a product subject to a Commission-ordered recall or a voluntary recall undertaken with the agency. Keep a suspect unit out of resale, trade-in, auction, employee giveaway, and donation channels while its identity and disposition are resolved.
Turn the notices into an equipment release gate
- Search for COMMOWNER, HD14P-Z, HX18, SUGIFT, and LTBBHG006 across asset lists, Amazon and Best Buy accounts, purchasing cards, reimbursements, vehicle inventories, backup equipment, and loaner stock.
- Tag and physically quarantine every possible match. Remove it from scheduling, crew load sheets, power-up or setup areas, and any place where a worker could assume it is available.
- Compare the rear label, retailer order record, colors, controls, hose, and supplied accessories with the corresponding CPSC notice. Use the notice's current recall contact when a model number is missing or the listing name conflicts with the label.
- Record the stop-use date, unit location, contact attempt, refund response, destruction evidence, and final disposal. Retain the record with the equipment file rather than only in one purchaser's inbox.
- After removing recalled units, review how small electric and employee-supplied machines enter the fleet. A procurement check can catch model identifiers and recall status before a low-cost backup tool becomes untracked field equipment.